View CXDLP files in your browser
The file Creality's Halot resin printers print from, a picture of the screen for every layer. Open one right here and see the print before it cures. Nothing leaves your device.
Or drop it anywhere on this page
What you'll see
Your print opens in 3D, rebuilt from its layers, with a bar under it to build it up layer by layer and the slicer's picture and settings beside it.
- The layer bar • Build it up, the cut at each layer lit
- Inspect • The layer as the screen lights it, and its exposure
- Its size, layers, resin and print time
- Export • Layers as PNG or ZIP, STL and PNG
About CXDLP
Creality's Halot printers print CXDLP files, which Creality's own slicers, Chitubox and UVtools save. Each layer is a picture of what the printer's screen lights, kept as runs of lit pixels along the screen's lines, after a header of the exposure, lift and layer height and the slicer's three pictures of the print.
The printer reads the file from its USB stick, and nothing built into Windows, macOS or phones opens one. Chitubox and UVtools show one on a computer, and the printer's own screen shows the slicer's picture.
Filepeek reads the layers in your browser and rebuilds the print in 3D from them. Drag the bar under it to build it up layer by layer, the cut at that layer lit, and Inspect shows the layer as the screen lights it, with its exposure, and the job's resin, print time, layer height and printer. Export saves the layer as PNG, every layer as a ZIP, the print as STL and the slicer's picture.
Creality resin print file
.cxdlp
Format
- MIME type
- application/octet-stream
- Made by
- Creality
Inside the file
- Layers
- Runs of lit pixels along the screen's lines
- Exposure
- Seconds a layer, longer for the bottom layers
- Pictures
- Three previews of the print
- Settings
- Layer height, lift and the printer's screen
Opens in every browser
Filepeek opens Creality's CXDLP files in Chrome, Edge, Firefox and Safari. On their own, browsers download them, and Windows, macOS, iOS and Android need Chitubox or UVtools to look inside one.
- YouChromeOpens through Filepeek
- YouEdgeOpens through Filepeek
- YouFirefoxOpens through Filepeek
- YouSafariOpens through Filepeek
Apps that open CXDLP
- WindowsChitubox and UVtools
- MacChitubox and UVtools
- iPhone and iPadNo app built in opens it
- AndroidNo app built in opens it
Questions
Can I check a print before it goes to the printer?
Yes. Drag the bar under the print to build it up layer by layer and see what each layer cures, with its exposure in Inspect, so a part that starts in midair or a missing support shows before you print.
Can I get the model back as an STL?
Yes. Export's Save as STL writes the print rebuilt from its layers, as fine as the screen's pixels and the layer height. It holds the supports too, so the model you sliced is the better start for changes.
Can my Halot print a CTB?
No, a Halot only prints CXDLP. Slice the model again for it in Creality's slicer or Chitubox, or convert the file in UVtools.