Open S19 files in your browser
The firmware files of NXP, Renesas and many other microcontrollers, in Motorola's S-record lines. See what one writes right here, and turn it into a .bin. Nothing leaves your device.
Or drop it anywhere on this page
What you'll see
Your firmware opens as the program it holds, the chip it's for and where it writes in flash.
- The chip it's for • RP2040, RP2350, ESP32, nRF and more
- The program • Its name, version and build date, when it says
- Where it writes • Each region and its size
- Save the flash image as a .bin
About S19
Motorola made S-records in the 1970s to load programs into its 6800 chips as plain text, and toolchains still write them: NXP's and Renesas's IDEs, IAR and GCC's objcopy save .s19, .srec and .mot files for flashing, and car and factory controllers are often updated with them.
Each line is a record: S and its type, a byte count, an address, the bytes as hex digits and a checksum. S1, S2 and S3 records carry the program at 16, 24 and 32 bit addresses, S0 a header, often the file's name, S5 a count of the records, and S7, S8 or S9 where the program starts, which ends the file.
Filepeek reads every record, checks every checksum and shows each region it writes, its size, the header and the start address, and saves the flash image as a .bin, with gaps filled as erased flash. Text shows the lines as they are.
Motorola S-record
.s19 • .srec • .mot • .s28 • .s37 • .sx
Format
- MIME type
- text/plain
- Made by
- Motorola
Inside the file
- Text
- A record a line
- Each line
- Type, address, bytes and checksum
- Addresses
- 16, 24 or 32 bits
- Made by
- Compilers and IDEs
Opens in every browser
Filepeek reads what an S-record file writes in Chrome, Edge, Firefox and Safari. On their own, browsers show it as text at best.
- YouChromeOpens through Filepeek
- YouEdgeOpens through Filepeek
- YouFirefoxOpens through Filepeek
- YouSafariOpens through Filepeek
Apps that open S19
- WindowsSRecord's srec_cat, free • Your chip's flash tool
- MacSRecord's srec_cat, free
- iPhone and iPadNo app opens it
- AndroidNo app opens it
Questions
How do I convert S19 to BIN?
Open it here and save the flash image as a .bin: every byte from the first address on, with gaps filled as erased flash, 0xFF.
What's the difference between .s19, .s28 and .s37?
The width of the addresses: S1 records with 16 bits in an .s19, S2 with 24 in an .s28 and S3 with 32 in an .s37. A .srec or .mot can hold any of them, and all open here.
What does a checksum error in an S-record mean?
A line was changed or cut short, often by an editor or a bad copy. Filepeek counts the lines whose checksums fail, so you know the file is damaged before you flash it.
How do I flash an .s19 file?
With your chip's own tool, like NXP's or Renesas's flash programmers, or the programmer your board came with. Many take the .bin Filepeek saves too.